System Alarm Car Keyless Entry Remote Security Start Viper LCD New Way Vehicle. The LH-002 module adopts 4 frequency 2 G communication module, power supply voltage 9-15 V, power consumption current 20 MA, external connection +12 power lines and ON (ACC) lines. Find 12 power supply (coarse red) on car alarm, connect.
Find the ON/ACC line (coarse yellow) and connect. The black terminal connects the antenna box and the other end docks the special wire harness. The 8 P end of the special wire harness is connected to the 8 P terminal on the control box, and the other end is connected to the original 5 P socket of the host antenna of the alarm. Select 2 G of SIM into the control box, and then connect the control box +12 power supply. Download APP and Registration Certification.Open the APP, and enter the main interface to see if the orange signal icon on the upper left is orange. If it is orange, it represents that the GSM card works normally and can be operated directly. If the signal icon is gray, the SIM card is not suitable for this control module or SIM card seat loose, can not connect to the network normally, please replace the SIM card. Alternatively, disconnect the power, connect again, wait 5 minutes, refresh (top right icon) APP interface status, and see if there is any change. We are 100% S atisfaction Guarantee to all our customers, Should you find any problems with our items, please do not hesitate in contacting our customer service team within 30 days upon receipt of item. We are here to help. Many times, this is the reason that prevents our reply from reaching you.
Thank You And Come Again.. This item is in the category "Consumer Electronics\Vehicle Electronics & GPS\Car Alarms & Security\Car Alarms & Security Systems". The seller is "masubha27" and is located in this country: CN. This item can be shipped worldwide.